The intelligent solution for olympic pools and adventure parks - please contact our sales for more details
The proliner navi3 pool robot cleans effectively lane by lane thanks to its rotating brushes and patented drive program. It is perfect for pools with a surface area of up to 400 m2 and is designed for hard, daily use and a long service life.
The proliner navi3 is equipped with a high-tech sensor. This allows fully automatic and systematic lane by lane cleaning for any pool. The device detects obstacles such as water mushrooms and bypasses them safely, so that the transported cable is not coiled. After work, the device switches off automatically. It cleans, for example, a pool of 12,5 x 50 m in less than 2.5 hours.
The vacuum up to 20 kg generated by the hydraulic system, the construction of the device and the scrubbing action of the brushes ensure a cleansing leaving clear traces - in all pools with a water depth of 20 cm and more. In addition, the unit is equipped on both sides with side brushes, which remove the dirt from side edges and corners.
A sophisticated hydraulic system guarantees effective cleaning performance across the entire width of the appliance. The dirty water runs through the filter and then through the pump. This way, the pump is protected against blockage and damage.
6 lamella filter cartridges are designed as a filter area up to 6 m2. Only with a large filter surface is it possible to filter out large dirt quantities. The filter cartridges are located in a filter box. This practical container can be removed from the top of the unit and carried to the cleaning area without loss of dirt.
Equipped with a trolley and a cable drum, the proliner navi3 is easily manoeuvrable on ground and neatly stowable, if not in use. The robot can be driven in the pool with operating drives. Using the integrated function of re-emergence, it moves itself from the pool ground back on the water surface, where it can be simply driven out of the pool by using the drives.